| Brand Name: | Y&X |
| Model Number: | Flotation Machine |
| MOQ: | 1 Set |
| Price: | Negotiable |
| Delivery Time: | 20-35 working days after technical confirmation |
| Payment Terms: | T/T,L/C |
Tungsten ores reach the flotation stage in two very different conditions. Wolframite is heavy and usually concentrated by gravity first, with only the fine and slime fractions left for flotation. Scheelite is lighter and far more often treated directly by flotation, using a fatty acid or sulphonate collector at high pH with sodium silicate to hold down silicate gangue. This unit is built on the XCF II / KYF II pneumatic mechanical agitation platform, effective volume 1 to 160 m3 per cell, applicable feed particle size 0.3-0.01 mm, so a single circuit can be laid out from roughing through cleaning.
![]()
![]()
The XCF II type has suction capability and can be used as the first cell of a bank, drawing pulp without a separate feed pump. The KYF II type has no suction capability and is arranged in the following cells. Used together the bank can be laid out horizontally, and froth between adjacent cells returns without foam reflux pumps. For tungsten this matters because roughing and cleaning need different residence times and reagent conditions, and a horizontal bank is easier to split into separate reagent addition points than a stepped arrangement.
Wolframite has a specific gravity near 7.1 to 7.5, so the pulp is heavy and coarse particles settle fast. Cells set for copper or lead pulp will sand up on tungsten unless impeller speed and circulation are adjusted for high density solids. Scheelite has the opposite problem: the collector is a soap-type reagent that foams readily, so the cell tends to build a deep, stable froth that carries gangue if froth depth is not held shallow. The platform is the same XCF II / KYF II series, but impeller speed, froth depth and reagent addition points are confirmed per ore rather than shipped as a fixed package.
| Model | Effective Volume (m³) | Processing Capacity (m³/min) | Motor Power (kW) | Impeller Diameter (m) | Air Flow (m³/m²·min) | Min. Air Pressure (kPa) | Unit Weight (kg) |
|---|---|---|---|---|---|---|---|
| XCF II/KYF II-1 | 1 | 0.2–0.5 / 0.2–1 | 4/3 | 0.40 / 0.34 | 0.05–1.4 | >11 | 1056 / 920 |
| XCF II/KYF II-2 | 2 | 0.5–1 / 0.5–2 | 5.5 / 4.5 | 0.47 / 0.41 | 0.05–1.4 | >12 | 1346 / 1158 |
| XCF II/KYF II-3 | 3 | 0.7–1.5 / 0.7–3 | 7.5 / 5.5 | 0.54 / 0.48 | 0.05–1.4 | >14 | 2172/2074 |
| XCF II/KYF II-4 | 4 | 1–2 / 1–4 | 11 / 7.5 | 0.62 / 0.55 | 0.05–1.4 | >15 | 2375 / 2100 |
| XCF II/KYF II-6 | 6 | 1–3 / 1–6 | 18.5 / 11 | 0.62 / 0.55 | 0.05–1.4 | >17 | 3545 / 3278 |
| XCF II/KYF II-8 | 8 | 2–4 / 2–8 | 22/15 | 0.72 / 0.63 | 0.05–1.4 | >19 | 4142 / 3857 |
| XCF II/KYF II-10 | 10 | 3–5 / 3–10 | 30 / 22 | 0.76 / 0.66 | 0.05–1.4 | >20 | 4894 / 4334 |
| XCF II/KYF II-16 | 16 | 4–8 / 4–16 | 37/22 | 0.86 / 0.74 | 0.05–1.4 | >23 | 6928 / 7545 |
| XCF II/KYF II-20 | 20 | 5–10 / 5–20 | 45/37 | 0.91 / 0.78 | 0.05–1.4 | >25 | 9200 / 8240 |
| XCF II/KYF II-24 | 24 | 6–12 / 6–24 | 55 / 37 | 0.95 / 0.80 | 0.05–1.4 | >27 | 10819 / 9820 |
| XCF II/KYF II-30 | 30 | 7–15 / 7–30 | 55 / 45 | 1.01 / 0.85 | 0.05–1.4 | >31 | 14810 / 13820 |
| XCF II/KYF II-40 | 40 | 8–19 / 8–40 | 75 / 55 | 1.10 / 0.95 | 0.05–1.4 | >32 | 18790 / 17097 |
| XCF II/KYF II-50 | 50 | 10–25 / 10–50 | 90 / 75 | 1.20 / 1.03 | 0.05–1.4 | >33 | 22000 |
| XCF II/KYF II-70 | 70 | 13–50 | 90 | 1.12 | 0.05–1.4 | >35 | 26200 |
| XCF II/KYF II-100 | 100 | 20–60 | 132 | 1.26 | 0.05–1.4 | >40 | 33500 |
| XCF II/KYF II-130 | 130 | 20–60 | 160 | 1.30 | 0.05–1.4 | >45 | 36200 |
| XCF II/KYF II-160 | 160 | 20–60 | 160 | 1.35 | 0.05–1.4 | >48 | 42500 |
Processing capacity and motor power are listed as XCF II / KYF II pairs where they differ. Specific parameters can be customized by contacting engineers.
Conditioned tungsten pulp enters the cell and is kept in suspension by the impeller while air is dispersed into fine bubbles. Tungsten mineral particles, made hydrophobic by the collector, attach to bubbles and rise into the froth, which is scraped off as rougher concentrate and passed to cleaning. Silicate gangue is held in the pulp by the depressant and reports to tailings. In wolframite circuits the flotation feed is normally the slime fraction from gravity concentration, so the cell duty is fine particle recovery rather than bulk roughing.
Cell size follows pulp volumetric flow and required residence time, not ore tonnage. Give us feed rate in m³/h and solids content and the bank can be sized against the specification table above.
Yes, the same XCF II / KYF II platform is used, but impeller speed, froth depth and reagent points are set differently. A mixed ore is normally split into separate flotation stages with their own settings.
Gravity is the main route for coarse wolframite but it loses fines. Flotation is added to treat the slime fraction so fine tungsten values are not discarded to tailings.
No. With the XCF II and KYF II combination the cells can be laid out horizontally and froth returns between adjacent cells without pumps.
Yes. Rotor, stator, impeller and cover plate wear parts are supplied in polyurethane, rubber, high alumina ceramic and silicon carbide composite, to our drawing or to a customer sample.
Y&X Beijing Technology Co., Ltd. supplies flotation equipment, flotation machine spare and wear parts, reagent dosing systems and agitation tanks for mineral processing plants. For tungsten projects, flotation cells, conditioning tanks and reagent dosing units can be supplied as a coordinated circuit together with selection support.