Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Mining Flotation Cell
Created with Pixso. Silica Sand Flotation Machine for Quartz Purification and Impurity Removal

Silica Sand Flotation Machine for Quartz Purification and Impurity Removal

Brand Name: Y&X
Model Number: Flotation Cell
MOQ: 1 Set
Price: Negotiable
Delivery Time: 20-35 working days after technical confirmation
Payment Terms: T/T,L/C
Detail Information
Place of Origin:
China
Certification:
ISO 9001
Applicable Material:
Silica Sand, Quartz Sand, Glass Sand, Foundry Sand
Cell Volume Range:
0.15-20 M3 Per Cell
Feed Size:
Typically Below 0.6 Mm
Process Stage:
Impurity Flotation After Scrubbing And Magnetic Separation
Wear Protection:
Polyurethane Or Rubber Lined Wetted Parts
Application:
Glass Grade Silica Sand Iron Removal
Packaging Details:
Standard export packing suitable for sea transport
Supply Ability:
Standard and customized production available
Highlight:

Silica Sand Flotation Machine

,

Quartz Impurity Removal Cell

,

Glass Grade Sand Beneficiation

Product Description
Silica Sand Flotation Machine for Quartz Impurity Removal

Silica sand for glass, foundry and water filtration requires low iron and low heavy mineral content. Flotation is used to remove iron bearing minerals, feldspar and mica from quartz sand after attrition scrubbing and magnetic separation, especially in the fine size fractions where magnetic separation loses efficiency. This flotation machine is configured for quartz sand slurry with attention to reagent consumption, froth control and the prevention of fine quartz loss to the froth.

Silica Sand Flotation Machine for Quartz Purification and Impurity Removal

Key Features
  • Quartz Sand Duty - Impeller speed and air rate are set for the higher density and abrasive nature of quartz sand slurry.
  • Iron and Heavy Mineral Removal - Designed for flotation of iron bearing minerals and mica ahead of acid leaching or final washing.
  • Low Product Loss - Froth depth and reagent addition are tuned so fine quartz is retained in the pulp instead of being floated off.
  • Abrasion Resistant Internals - Rotor, stator and tank lining can be supplied in wear resistant materials for continuous sand slurry operation.
  • Compact Bank Arrangement - Cells can be arranged in roughing and cleaning banks according to required silica grade.
  • Integrated Circuit Support - Attrition scrubber, magnetic separator, flotation and dewatering stages can be quoted as a coordinated circuit.
Typical Configuration
Item Specification
Applicable Material Silica sand, quartz sand, glass sand and foundry sand
Cell Volume Range 0.15 m³ to 20 m³ per cell
Machine Series SF type self aspirating or XCF II / KYF II forced air
Feed Size Typically below 0.6 mm, with fine fraction control before flotation
Process Stage Impurity flotation after scrubbing and magnetic separation
Wear Protection Polyurethane or rubber lined wetted parts available
Customization Capacity and circuit arrangement confirmed according to target Fe2O3 content

Final circuit design depends on the sand deposit, target Fe2O3 level and required product size distribution. Sample testing is recommended before equipment selection.

Working Principle

Quartz sand slurry is conditioned with collector and pH modifier so that iron bearing minerals and mica become hydrophobic while quartz remains hydrophilic. In the flotation cell, air is dispersed into fine bubbles by the impeller, and the hydrophobic impurities attach to bubbles and are removed as froth. The quartz product leaves with the pulp for dewatering and, where required, acid leaching. Stable air dispersion and controlled froth depth are critical, because excessive froth recovery carries fine quartz out with the impurities and reduces yield.

Applications
  • Glass grade silica sand iron removal
  • Foundry sand and water filtration sand upgrading
  • Quartz sand flotation for ceramic raw material
  • Feldspar removal from quartz sand deposits
  • Fine sand tailings reprocessing and recovery
Information Required for Quotation
  • Feed rate in t/h and slurry density
  • Feed particle size distribution and current Fe2O3 content
  • Target product grade and downstream process, for example acid leaching
  • Existing upstream equipment such as scrubber and magnetic separator
  • Available floor space and preferred circuit layout
FAQ
Q1: Is flotation necessary if magnetic separation is already used?

Magnetic separation is effective for liberated magnetic minerals, but fine iron staining and mica often require flotation as well. The combination is common in glass sand plants.

Q2: Can the machine handle abrasive sand slurry?

Yes, provided wetted parts are supplied with suitable wear protection. Rotor, stator and lining material are selected according to the sand size and operating hours.

Q3: How many cells are needed?

The number of cells depends on feed rate, required retention time and target grade. Roughing and cleaning banks are sized after test work.

About Us

Y&X Beijing Technology Co., Ltd. supplies flotation equipment, flotation machine spare and wear parts, reagent dosing systems and agitation tanks for mineral processing plants. Equipment selection and circuit support are provided for silica sand, quartz, kaolin and feldspar projects, including coordinated scrubbing, magnetic separation, flotation and reagent dosing.