Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Flotation Wear Parts
Created with Pixso. KYF II Flotation Machine Main Shaft Assembly Upper and Lower Shaft Replacement Part

KYF II Flotation Machine Main Shaft Assembly Upper and Lower Shaft Replacement Part

Brand Name: Y&X
Model Number: KYF II Main Shaft Assembly
MOQ: 1 Set
Price: Negotiable
Delivery Time: 15-30 working days after drawing confirmation
Payment Terms: T/T,L/C
Detail Information
Place of Origin:
China
Certification:
ISO 9001
Applicable Equipment:
KYF II / XCF II Pneumatic Mechanical Agitation Flotation Machine
Cell Volume Range:
1-160 M3
Assembly Scope:
Upper Shaft, Lower Shaft, Coupling, Matched Fasteners
Material:
45 Steel Or 40Cr Forged Steel
Customization Basis:
Drawing, Sample Or Measured Dimensions
Surface Treatment:
Anti Corrosion Coating On Non Fitting Surfaces
Balance Check:
Available On Request
Application:
Impeller Drive And Torque Transmission In Flotation Mechanism
Packaging Details:
Standard export wooden case suitable for sea transport
Supply Ability:
Standard and customized production available
Highlight:

Main Shaft Assembly Replacement

,

KYF II Upper and Lower Shaft

,

Flotation Machine Spare Shaft

Product Description
KYF II Flotation Machine Main Shaft Assembly

The main shaft assembly is the transmission component that connects the drive to the impeller of a KYF II / XCF II flotation machine. It carries the impeller load, transmits torque from the motor and gearbox, and keeps the impeller running on a stable axis inside the flotation cell. Worn, bent or corroded shafts cause vibration, unstable froth and unplanned downtime, so the shaft assembly is normally replaced together with the bearings during a major overhaul.

Key Features
  • Upper and Lower Shaft Design - Shaft assembly is supplied as an upper shaft and lower shaft combination matched to the flotation cell structure.
  • Forged or Rolled Steel Options - 45 steel or 40Cr forged steel can be selected according to load and operating conditions.
  • Machined to Drawing - Shaft diameter, keyway, thread and coupling dimensions are machined according to the flotation machine model and confirmed drawing.
  • Matched Bearing Seats - Bearing journals are finished to the tolerance required by the matched bearing set for correct fit and alignment.
  • Dynamic Balance Check - Shaft and impeller assembly can be checked for balance before delivery to reduce vibration at operating speed.
  • Replacement Friendly - Supplied as a complete assembly so the worn shaft can be exchanged during a scheduled shutdown.
Applicable Models
ItemSpecification
Applicable EquipmentKYF II / XCF II pneumatic mechanical agitation flotation machine
Cell Volume Range1 m³ to 160 m³ (shaft dimensions vary by cell size)
Assembly ScopeUpper shaft, lower shaft, coupling and matched fasteners
Material45 steel or 40Cr forged steel, confirmed per order
Surface TreatmentAnti corrosion coating on non fitting surfaces
CustomizationAvailable according to drawing, sample or measured dimensions

Dimensions are confirmed against the flotation machine model and the existing shaft before production. Please provide the cell volume, machine series and available drawing when requesting a quotation.

Function in the Flotation Circuit

The motor drives the shaft through the transmission system. The shaft transfers rotation to the impeller, which agitates the pulp and disperses air into fine bubbles. A straight, correctly machined shaft keeps the impeller clearance stable, which maintains consistent air dispersion and froth recovery. When the shaft is bent or the bearing seats are worn, impeller clearance changes and flotation performance drops even if the impeller itself is still serviceable.

Typical Replacement Situations
  • Vibration or abnormal noise increasing at the flotation mechanism
  • Impeller contact with the stator caused by shaft deflection
  • Worn bearing journal or damaged keyway and coupling
  • Corrosion or erosion of the shaft in acidic or abrasive pulp
  • Scheduled overhaul together with bearings and rotor stator replacement
Information Required for Quotation
  • Flotation machine series and model, for example KYF II-16
  • Cell effective volume in m³
  • Drawing or measured dimensions of the existing shaft
  • Material preference and required quantity
  • Photos of the worn part if a drawing is not available
Ordering Notes
  • The shaft assembly is produced according to the confirmed drawing or sample dimensions; please confirm before production
  • Bearings and impeller are separate items and can be quoted together on request
  • Packing is standard export wooden case suitable for sea transport
FAQ
Q1: Is the main shaft supplied as a complete assembly?

Yes. The assembly is normally supplied as upper shaft and lower shaft with coupling and matched fasteners. Bearings and impeller are separate items.

Q2: Can the shaft be made without a drawing?

Yes. A physical sample, measured dimensions and clear photos can be used for evaluation before production.

Q3: Which materials are available?

45 steel and 40Cr forged steel are commonly used, and the final choice is confirmed according to load and slurry conditions.

Q4: How long is the delivery time?

Standard models are usually delivered in 15 to 30 working days after drawing confirmation. Custom shafts depend on machining requirements.

About Us

Y&X Beijing Technology Co., Ltd. supplies flotation equipment, flotation machine spare and wear parts, reagent dosing systems and agitation tanks for mineral processing plants. Shaft assemblies, bearings, rotors, stators and impellers are supplied according to machine model, drawing or sample, together with selection and technical support.