Date: November 11, 2026
Location: Western Australia, Australia
Chalice Mining has commenced a continuous pilot plant program for its Gonneville Platinum Group Metals (PGM), Nickel, Copper and Cobalt Project in Western Australia. The program marks an important milestone in advancing the project's Definitive Feasibility Study (DFS) and validating its proposed mineral processing flowsheet.
Approximately five tonnes of fresh sulphide ore, representative of the planned early-stage plant feed, are being processed to evaluate flotation performance and generate concentrate samples for potential offtake partners.
The pilot program evaluates the processing of complex polymetallic sulphide ore containing copper, nickel, cobalt, palladium, platinum and gold.
The representative ore sample contains:
Nickel: 0.33%
Copper: 0.28%
Cobalt: 0.025%
Combined palladium, platinum and gold: 1.7 g/t
The ore has been prepared to a planned primary grind size of 38 μm (P80) before entering the processing circuit.
The flowsheet incorporates sequential copper and nickel flotation, followed by downstream leaching to recover additional valuable metals.
The continuous flotation pilot is expected to run for approximately one week, providing operating data and concentrate samples for further evaluation.
The Gonneville processing flowsheet is designed to produce three main products:
Copper-PGM-gold concentrate.
Nickel-cobalt-PGM-gold concentrate.
PGM doré through downstream leaching.
The project is modelled to produce approximately 45,000 tonnes of copper concentrate and 95,000 tonnes of nickel concentrate annually over an open-pit mine life exceeding 23 years.
These products will be used for further metallurgical evaluation and discussions with potential copper and nickel offtake partners.
Initial flotation pilot results are expected in early 2027, with the complete pilot program targeted for completion in the first quarter of 2027.
The Gonneville project highlights the importance of continuous flotation testing and process optimization in developing flowsheets for complex polymetallic sulphide ores.
Sequential flotation provides a processing route for separating copper-rich and nickel-rich mineral streams into different concentrates. Grinding conditions, flotation selectivity and reagent selection are important factors in achieving the desired concentrate quality and recovery performance.
Y&X provides flotation machines, laboratory flotation equipment and mineral processing solutions for copper, nickel, gold and polymetallic ore beneficiation. Equipment configurations can be selected according to ore characteristics, processing capacity and project requirements.
Source: Chalice Mining Limited, ASX Announcement, November 11, 2026.